Modifier 24 in Medical Billing: Description, Rules, Examples and Reimbursement

modifier-24

Modifier 24 tells the payer that an evaluation and management (E/M) visit during a surgical global period has nothing to do with the surgery. Append it to the E/M code when the same physician sees a patient for an unrelated problem, starting the day after the procedure, so it isn’t bundled into the global fee.

Picture this: a surgeon operated on a patient’s knee three weeks ago. Today the same patient is back with an ankle sprain on the other leg. Bill that visit with no modifier and it will most likely deny as part of the global fee. Add modifier 24 with a clean note, and it gets paid.

Modifier 24 at a Glance

Question

Answer

What it is

CPT modifier for an unrelated E/M service by the same physician or other qualified health care professional during a postoperative period

Goes on

The E/M code, never the surgical code

Applies to

Procedures with a 10-day or 90-day global period

Timing

The day after the procedure through the end of the global period

Must show

A visit and a diagnosis that are unrelated to the surgery, supported by the note

Don’t use for

Routine post-op care, complications, or same-day visits (use 25 or 57)

What Is Modifier 24?

The CPT description of modifier 24 is “Unrelated Evaluation and Management Service by the Same Physician or Other Qualified Health Care Professional During a Postoperative Period.” In plain terms, it unbundles a visit that the global surgical package would otherwise swallow.

A few things to keep straight from the start:

  • It goes on the E/M code only, never on the surgical code.
  • It applies during the postoperative period of a procedure with a global period.
  • The visit has to be unrelated to that procedure, and your note has to say so.

Why Do We Use Modifier 24 in Medical Billing?

Because the global surgical package already covers the surgery itself plus the routine care around it, including related E/M visits during the global period. A surgeon who bills a follow-up E/M in that window without a modifier will usually see it denied as included in the global fee. Medicare contractors say this directly: without modifier 24, the E/M is denied as part of the global package.

So modifier 24 does two jobs:

  1. It protects revenue. A genuinely separate visit gets paid.
  2. It tells the story. The payer sees at a glance that this isn’t routine aftercare.

There’s a compliance side too. Auditors and payers look at modifier 24 closely, which is why a clean, specific note matters more here than on most E/M claims. If your team isn’t sure where the line sits, a second pair of eyes from a medical coding services team before the claim goes out is cheaper than an appeal afterward.

What Is Modifier 24 Used For? 

Use modifier 24 when all of these are true:

  • The same physician (or another provider of the same specialty in the same group) performed a procedure with a 10-day or 90-day global period.
  • The E/M service happens during that postoperative period, on a date after the procedure.
  • The reason for the visit is unrelated to the surgery, supported by a different, clearly unrelated diagnosis.
  • The note shows a separately documented, billable E/M.

The unrelated problem can be anything that has no connection to the operated condition or its complications. It can also be the ongoing management of something like chemotherapy or immunosuppressive therapy during the postoperative period of a related surgery, which several payer policies list as a valid use.

How to check the global period:

Look up the surgical code’s global days (010 or 090) in the CMS Physician Fee Schedule lookup, then count the window from the day after surgery. Write the end date in the chart so billing never has to guess.

When NOT to Use Modifier 24

Skip it in these cases:

  • Routine post-op care. Wound checks, suture removal, and the planned follow-up visit are part of the global package. These are tracked with 99024, a no-charge code, not billed as E/M.
  • Complications of the surgery. A wound infection stays related even if you assign a different diagnosis code. A different code isn’t the same as an unrelated problem.
  • The underlying condition that led to surgery. Managing it is still part of the package.
  • The same day as the procedure. That’s modifier 25 or 57 territory, not 24.
  • Outside the global window. Once the global period ends, bill the E/M normally.
  • A different specialty. A hospitalist or another specialty seeing the same patient isn’t inside the surgeon’s global package, so no modifier is needed for that provider.

Modifier 24 with Examples

Example 1: the clean case. A patient had a knee arthroscopy (a 90-day global procedure) three weeks ago. They come back to the same surgeon complaining about an ankle sprain on the other leg. The surgeon evaluates it, documents the new problem, and bills 99213-24 with the ankle diagnosis. The sprain has nothing to do with the knee surgery, so the visit sits outside the global package.

Example 2: looks unrelated, isn’t. Same surgery, but the patient returns with a red, draining incision. The surgeon codes a different diagnosis for the infection and bills an E/M with 24. That claim shouldn’t go out. Wound infection is a complication of the surgery, so it stays inside the global package, and a payer that reviews the note will agree.

Example 3: wrong provider. A hospitalist sees the surgical patient for an unrelated condition. No modifier is needed, because the hospitalist isn’t covered by the surgeon’s global package.

Modifier 24 vs 25 vs 57 vs 79

These four get mixed up constantly. The difference is timing and what you’re modifying.

Modifier

Goes on

What it says

Timing

24

E/M

Unrelated E/M by the same physician during a postoperative period

After the procedure, inside a 10- or 90-day global

25

E/M

Significant, separately identifiable E/M on the same day as a procedure or other service

Same day

57

E/M

This E/M led to the decision to perform major surgery

Day before or day of a 90-day-global surgery

79

Procedure

Unrelated procedure by the same physician during a postoperative period

During the global period

A quick way to choose:

  1. Is the E/M after the procedure, inside the global window? If it’s unrelated, think modifier 24.
  2. Is it the same day as a procedure? Think 25 for a significant, separate E/M, or 57 if it produced the decision for major surgery.
  3. Is it a procedure (not an E/M) for an unrelated problem during the global period? That’s modifier 79 on the procedure.

Related procedures have their own modifiers: 78 for an unplanned return to the OR for a related complication, and 58 for a staged or planned related procedure. Neither one is 24.

Modifier 24 and 25: Can They Be Used Together?

Yes, sometimes. It happens when an unrelated E/M visit during the global period also includes an unrelated minor procedure on the same day. Modifier 24 lets the E/M get paid despite the global period. Modifier 25 shows that the E/M was significant and separate from the minor procedure performed that day. The procedure itself may need modifier 79.

A practical tip from coding references: list 24 first, because payer edits often process the postoperative-period edit before anything else. Expect documentation requests on claims like this, and make sure the note supports the E/M and the procedure separately.

Modifier 24 and 57: Can They Be Billed Together?

Yes, when the situation fits both. Say a patient is inside a global period and presents with a new, unrelated problem. At that visit, the provider decides the problem needs major surgery on the same day or the next. Modifier 24 explains why an E/M is billable inside the global period, and modifier 57 explains that the visit produced the decision for surgery. Payers can differ on this combination, so check the policy and keep the note specific about both facts.

Is Modifier 24 an Informational Modifier?

Yes, in the pricing-versus-informational split that coding courses and exams use. Modifier 24 doesn’t change the fee for the E/M, so it’s classed as an informational (statistical) modifier, and NHA CBCS-style practice questions commonly use it as the example.

There’s a catch. It still decides whether the E/M gets paid at all, which is why AAPC coding alerts group 24, 25, and 57 together as payment modifiers. Payer lists differ, and modifier order on a claim can depend on the payer’s classification, so follow the payer’s own list on real claims.

Modifier 24 Reimbursement

When modifier 24 is used correctly, the E/M is paid under the payer’s normal rules for the E/M level you documented. The modifier doesn’t raise or lower that level. It decides whether the visit is separately payable.

What drives the outcome in practice:

  • The diagnosis. Contractors expect a diagnosis that clearly supports an unrelated reason for the visit. Where the diagnosis does that, many won’t ask for more.
  • The global period dates. The visit has to land inside an active 10- or 90-day window, after the day of surgery.
  • The note. It should show the unrelated problem, your evaluation, and the E/M level, separate from any post-op checking.
  • The payer. Medicare and commercial plans publish their own modifier 24 policies, and some are stricter about documentation.

If a modifier 24 claim sits unpaid or comes back short, don’t let it age. Structured A/R follow-up catches these claims before the timely filing and appeal windows close.

Common Modifier 24 Denials and How to Fix Them

Denial pattern

Usual cause

Fix

E/M denied as included in the global package

Modifier 24 missing

Correct and resubmit with 24 if the visit was truly unrelated

Modifier 24 denied as related

Note or diagnosis ties the visit to the surgery

Appeal with the note showing the unrelated problem, or accept the denial if it was related

Denied for global period

Visit was on the day of surgery or outside the window

Use 25/57 for same-day visits, or bill without 24 outside the window

Request for records

Payer review of a 24 claim

Send the note, the unrelated diagnosis, and the procedure and global dates

The same mistakes keep coming back: no unrelated diagnosis on the claim, a note that reads like routine post-op care, and 24 attached to a same-day visit. A dedicated denial management process finds the pattern instead of fixing one claim at a time.

Quick Documentation Checklist Before You Bill

  • Procedure date and global period (10 or 90 days) confirmed
  • Visit date is after the procedure, inside the window
  • Chief complaint and assessment clearly unrelated to the surgery
  • Unrelated diagnosis on the claim
  • E/M level supported by the note
  • Modifier 24 on the E/M, not the procedure, listed first when you have other modifiers

FAQs

Can modifier 24 and 25 be used together? 

Yes, in some cases. Use both when an unrelated E/M inside the global period also includes a separate, unrelated minor procedure that day, and list 24 first.

Can modifier 24 and 57 be billed together? 

Yes, when an unrelated visit during the global period leads to the decision for major surgery. Check the payer’s policy first.

Is modifier 24 considered an informational modifier? 

Yes, in the standard pricing-versus-informational split. It doesn’t change the E/M’s fee, but it can decide whether the visit is paid, so some references also call it a payment modifier.

What’s the difference between modifier 24 and 79? 

Modifier 24 goes on an unrelated E/M. Modifier 79 goes on an unrelated procedure performed during the global period.

Does modifier 24 apply to a 0-day global procedure? 

Generally no. Under CMS rules a 0-day procedure has no postoperative days, so there is nothing to unbundle. Modifier 24 applies to 10- and 90-day globals, and a same-day visit uses 25 or 57.

Final Thoughts

Modifier 24 is a small modifier with a narrow job: prove that a visit during a global period is unrelated to the surgery. Confirm the global window, make the unrelated reason obvious in the note and the diagnosis, choose 25, 57, or 79 when the facts call for them, and keep related care out of the E/M altogether. Do that consistently and modifier 24 claims get paid; skip it and the same visit gets denied as bundled.

If you’d rather not carry this alone, IRCM can take over coding review, claims, and denials so your team’s time goes to patients, not payer edits. You can start with our outsource medical billing services.

This article is for general educational purposes only and is not medical, legal, or coding advice. Modifier rules vary by payer and change often, so verify with the current CPT code book, CMS, and your payer before billing.

Get Customized Billing Quote

Let's Work Together
Thanks for requesting a consultation. An iRCM Inc Business Representative will be in touch with you shortly.

Get a Custom Quote